Penta 30 Square Hot Surface Electronic Ignition System – 30FSSEI-SQ-120VAC-Schneller Versand

Description

Penta 30″ Square Hot Surface Electronic Ignition System – 30FSSEI-SQ-120VAC

Enhance your fire pit experience with our Penta 30″ Square Hot Surface Electronic Ignition System.

1. Start Up: This is done by use of a wall switch or remote control. When the ON command is received, the system completes initial safety checks then starts flow of pilot gas. After 5 seconds the hot surface igniter glows igniting pilot flame. When the system confirms pilot flame present, the main burner gas will flow ignited by the pilot flame.
2. Operation: While enjoying the ambiance of your fire pit, the system is at work monitoring flame status, internal temperatures / voltages and other safety parameters. If flame loss does occur, the system will turn off all gas flow, and then restart by automatically commencing Start sequence.
3. Shut Down: To turn OFF the fire pit simply use wall switch, remote control or whole house system.

Features:

• Fully Assembled- ready to install. Control components are protected within valve box.
• Start via wall switch, remote or whole house system; auto re-light if flame is lost.
• Ignition is complete using a robust and reliable Hot Surface igniter.
• On/Off models: Use with optional wall switch or Remote Control available.
• High/Low Flame Control Models: Adjust high setting to low setting- ~45% turn down (Remote Control included).
• 120vac: Standard outdoor grounded power cord- simply plug into GFCI outlet.
• 24vac Option: Typically used pool side or with other lower voltage requirements.
• Natural Gas or Liquid Propane: Factory built & tested for either fuel.
• Internal temperature monitoring with overheat auto shutoff.
• CSA Certified in US & Canada to ANSI Z21.97-2014 / CSA 2.41-2014 requirements.
• Optional Controls: On/Off Remote, Timers, Power Supplies and an Emergency Shutoff.

*]:pointer-events-auto scroll-mt-[calc(var(–header-height)+min(200px,max(70px,20svh)))]“ dir=“auto“ data-turn-id=“request-6957eeb2-c580-8321-8b20-d91dc450754f-36″ data-testid=“conversation-turn-274″ data-scroll-anchor=“true“ data-turn=“assistant“>

What Our Experts Think

• 30″ square Penta burner with hot surface electronic ignition for dependable, consistent flame start‑up.

• Durable, professional‑grade construction for residential and commercial fire pits.

• Even flame distribution enhances warmth and ambiance.

• Designed for safety, efficiency, and long‑lasting outdoor performance.

• Ideal for custom square fire pit installations.

Q&A

• Q: What fuel does it use?
  A: Natural gas (NG) or propane (LP) version available; confirm before ordering.

• Q: Is it compatible with square fire pits?
  A: Yes, engineered for 30″ square Penta setups; verify dimensions before installation.

• Q: Is professional installation recommended?
  A: Yes, for safe gas connection and optimal ignition performance.